Adjustment Guide for Stand - on Lawn Mowers

The Mowing Height Determines the Life and Death of the Lawn! Adjustment Guide for Stand - on Lawn Mowers with 'Adjust Lawn Mower Height'

Have you ever wondered how a simple 1 - centimeter miscalculation in mowing height could potentially open the door to weed invasion in your lawn? The mowing height of your stand - on lawn mower is not just a number; it's the key to a lush, healthy lawn. In this guide, we'll show you how to lock in the perfect mowing height in just 4 steps, with a special focus on how to adjust lawn mower height accurately

Step 0: Safety Preparations

• Turn off the engine and pull out the key → Prevent accidental startup.

• Wear cut - resistant gloves → The blades are sharp!

• Park on a level ground → Ensure accurate measurement.

Step 2: Read the current height 

• Check the scale: The numbers (1 - 10) represent the gears.

• Convert to the actual height: (Refer to the manual for specific values. Approximately, a change of 1 gear is about 1.5 cm.)

• Measure the real grass height: → Mow the grass before adjustment → Insert a ruler vertically into the lawn → Measure the length of the grass stem (not the leaf tip!).

Step 3:Scientifically adjust the height

• Pull out the safety pin.

• Pull up the locking button (usually need to press down and then pull outwards).

• Push the crossbar to the target gear position (you should hear a "click" sound).

• Release the lock and it will automatically lock into place.

• Insert the safety pin.

Summer Life - saving Tips:

• Increase the gear by 1 - 2 levels during the intense heat! Retain grass leaves for shade and water retention to prevent the soil from cracking due to sun exposure.

• Do not mow wet grass within 24 hours after rain (the leaves may tear and get infected).